One of the important things that separates the CCNA from the Network+ exam is the amount of practice and labbing that is required. There is obviously still a strong, textbook study element but there just needs to be a hands on experience that will compliment that. There are simulators that will mimic the actual IOS on the routers fairly well, extremely well in some cases but, there just isn't a replacement for the actual cabling and set up of the actual network.
So, one of the perks of my job is having access to literally a storeroom full of old routers and parts. My boss gave me the go ahead that if I found anything that I could use, to bring it out of storage and set it up. I found (1) 3620 router, (1) 2650, and a few 2610s all with various interface cards. The downside is that they all need a memory upgrade and an update to the IOS to make them similar to what will be on the CCNA. It really is all just experience in the end. Going to dust them all off, plug in some shiny new sticks and give them a software upgrade to plug them into a rack.
The next thing I'll need is a couple of newer switches, at least 3 to practice STP. We don't have any of those lying around, at least none that I saw so those will probably have to be purchased off Ebay. All 3 of them with the model I want will probably run about 200 dollars or so, but considering I can resell them once I'm done. May not be out much dough. Once everything is set up and ready to get put into the rack, I'll post some pictures to get an idea of what these things actually look like, and what type of cabling I might need to use.
It is good to get out of the textbook and do some hands on stuff, gives the whole experience a fresh breath of air. You can only read for so long before you get bored!
No comments:
Post a Comment